Ultrasonic Cleaner for 3D Printing Resins – 5 Liters
- Order number: 1490 4197
Resin Cleaner
Clean resin models. Less solvent smell.
Anyone who regularly cleans 3D-printed resin models knows the strong smell of traditional cleaners containing isopropyl alcohol (IPA). Our special resin cleaner offers powerful cleaning performance with much less smell.
The cleaning liquid effectively removes uncured resin from the surfaces of 3D-printed models and is especially suitable for use in ultrasonic cleaning baths.
Powerful Cleaning with Less Solvent Smell
The special solvent-based formula effectively dissolves liquid resin residues. At the same time, the cleaner evaporates much more slowly than isopropyl alcohol.
This means fewer solvent vapours are released at room temperature, helping to reduce the strong smell usually associated with cleaning resin models.
Ideal for Ultrasonic Cleaners
An important advantage is the high flash point. Compared to highly flammable cleaners such as isopropyl alcohol, the risk of forming flammable vapour-air mixtures at normal room temperature is much lower.
This makes the cleaner especially suitable for use in compatible ultrasonic cleaning devices. Always follow the instructions of the device manufacturer.
Benefits at a Glance
- Powerful cleaning: Removes liquid, uncured resin residues from 3D-printed models.
- Less smell: Much less solvent smell compared to traditional isopropyl alcohol.
- High flash point: Lower fire risk when used correctly.
- Suitable for ultrasonic cleaning: Ideal for thorough cleaning in compatible ultrasonic devices.
- Can be diluted with water: Can be mixed with water if needed.
- Low evaporation: Evaporates more slowly at room temperature.
Instructions for Use
Suitable for cleaning 3D-printed resin models in immersion baths or ultrasonic cleaning devices.
The cleaning time depends on the type of resin, the amount of resin residue and the cleaning method.
Important Information:
Do not use as a spray cleaner. Avoid creating mist or aerosols. Use only in well-ventilated areas and follow the safety instructions.
Do not pour the cleaner into drains. Used cleaning liquid, especially when contaminated with resin residues, must be disposed of as chemical waste according to local regulations.
Contents: 5 litres
Material Compatibility
For sensitive plastics, especially gingiva materials, we recommend testing a small sample before use. Please also check compatibility with rubber seals, as the cleaner may affect these materials.