D-LE 255 S Extraction unit for D-PI 300
- Order number: 1800 4126
Best extraction results with maximum protection against fine dusts
The extraction units have a powerful, sound-insulated high-pressure fan and are equipped with automatic air volume regulation, automatic switch-off and filter change indicator.
The D-LE 255/CAM series has the possibility of the detection device (CNC machine) to set the prescribed air volume flow and is used as extraction of dusts primarily, metal dust, mineral dust, plastic dust, plaster dust oxide ceramic and other ceramic dusts.
Volume flow control device
The air volume flow is controlled automatically. The air volume at the suction funnel is always the same, regardless of the degree of contamination of the filter medium. The extraction unit carries out a self-test at certain time intervals, at the same time as the air lines are sucked free.
The height of the air volume can be adjusted depending on the type of capture device used (suction mouth) and its associated air volume and can be read off the display.
The volume flow control device not only monitors the air volume flow, but also the degree of soiling of the pre-filter and ultra-fine filter. The condition of the filter components as well as the drop in the extracted air volume flow at the detection device (extraction mouth) below the specified minimum value is indicated visually and acoustically.
Technical data
Width 420 mm
Depth 390 mm
Height 542 mm
Electr. Connection 200-240 Volt (50 Hz)
Engine technology D-LE 255 S/CAM (collector-engine)
D-LE 255 SB/CAM (Brushless- engine)
Power consumption max. 1100 Watt (power of the fan)
Air flow rate max. 55 l/sec.
Sound pressure level 52 dB(A) at min. Air volume
64 dB(A) at max. Air volume
Fine filter quality Dust class M, DIN EN 60335-2-69
Filter area 1,4 m2
Hose connection Ø 50 mm
FILL Volume 10 kg
Weight 25 kg
Housing RAL 9002 – powder-coated
The extraction units have a powerful, sound-insulated high-pressure fan and are equipped with automatic air volume regulation, automatic switch-off and filter change indicator.
The D-LE 255/CAM series has the possibility of the detection device (CNC machine) to set the prescribed air volume flow and is used as extraction of dusts primarily, metal dust, mineral dust, plastic dust, plaster dust oxide ceramic and other ceramic dusts.
Volume flow control device
The air volume flow is controlled automatically. The air volume at the suction funnel is always the same, regardless of the degree of contamination of the filter medium. The extraction unit carries out a self-test at certain time intervals, at the same time as the air lines are sucked free.
The height of the air volume can be adjusted depending on the type of capture device used (suction mouth) and its associated air volume and can be read off the display.
The volume flow control device not only monitors the air volume flow, but also the degree of soiling of the pre-filter and ultra-fine filter. The condition of the filter components as well as the drop in the extracted air volume flow at the detection device (extraction mouth) below the specified minimum value is indicated visually and acoustically.
Technical data
Width 420 mm
Depth 390 mm
Height 542 mm
Electr. Connection 200-240 Volt (50 Hz)
Engine technology D-LE 255 S/CAM (collector-engine)
D-LE 255 SB/CAM (Brushless- engine)
Power consumption max. 1100 Watt (power of the fan)
Air flow rate max. 55 l/sec.
Sound pressure level 52 dB(A) at min. Air volume
64 dB(A) at max. Air volume
Fine filter quality Dust class M, DIN EN 60335-2-69
Filter area 1,4 m2
Hose connection Ø 50 mm
FILL Volume 10 kg
Weight 25 kg
Housing RAL 9002 – powder-coated
NEU
Viewed